U01
Security systems
Planning and installing the systems that protect a building, from sensors to monitoring.
JOB NO. KC-TIGARD-OR · CCB #249201 · TIGARD, OR · 11 MI FROM THE SHOP
Low Voltage Contractor in Tigard, OR.
From the Milwaukie shop it is 11 miles, about 28 minutes, to Tigard. Knepper Contracting brings the same licensed commercial low-voltage crew — not a subcontractor — for structured cabling, fiber, cameras, access control, Wi‑Fi and A/V.
DISTANCE11 mi
DRIVE TIME28 min
RATING5.0 / 18
LICENSEDOregon
Job ticket · KC-TIGARD-OR
CityTigard, OR
Distance11 mi
Drive time28 min
LicensedOregon
Oregon CCB#249201Active
Routed via OSRM + NominatimRetrieved 10 Sep 2026
THE NUMBERS FOR TIGARD
11 miles. 28 minutes.
From 11209 SE Wood Ave, Milwaukie, OR 97222 — geocoded with Nominatim, routed with OSRM on real road data, retrieved 10 September 2026.
BASEMilwaukie, OR
MILES11 mi
DRIVE TIME28 min
SOURCEOSRM + Nominatim
Where in Tigard: the Tigard Triangle at the junction of Highway 217, I-5 and 99W, and the retail area around Washington Square.
Typical buildings: a mix of office, light-industrial and retail buildings in the Triangle, and big-box and multi-tenant retail near Washington Square.
Permitting: Tigard self-administers: the City of Tigard Building Division issues and inspects both the building and the electrical permit itself, rather than routing electrical to the county.
THE MAP
You are here: Tigard, OR.
The lit pin is Tigard. The rest are the other cities this crew already covers. Not to scale.
Milwaukie shop
route to Tigard Schematic, oriented to compass north · not to scale
route to Tigard Schematic, oriented to compass north · not to scale
Clackamas6.2 mi12 min
Happy Valley6.3 mi14 min
Portland7.9 mi19 min
Oregon City7.9 mi15 min
Lake Oswego8 mi20 min
West Linn8 mi15 min
Tigard · you are here11 mi28 min
Gresham12.4 mi28 min
Beaverton15.4 mi31 min
Vancouver, WA15.9 mi31 min
Tualatin17.6 mi28 min
Wilsonville21.3 mi31 min
Hillsboro24.5 mi48 min
WHAT WE INSTALL IN TIGARD
Nine services, one licensed crew.
The full scope travels with the crew — there is no stripped-down version for a job outside Milwaukie.
U03
Low voltage cabling
Cat5e, Cat6 and Cat6A copper for data, voice and PoE devices, dressed and labelled.
U07
Networking / cabling
Racks, patch panels and structured cabling that the next technician can read.
U08
Access control
Doors, gates and restricted areas on keycard, fob, biometric or mobile credentials.
WHAT A WALKTHROUGH COVERS
What happens when we come to Tigard.
- We look at the building, not a drawing.Pathways, distances, what is already in the walls.
- You get a written scope and price.Counts, routes, materials and a number you can compare.
- The licensed crew installs to standard.Dressed and labelled, around your schedule and your trades.
- You get paperwork you can use.What was installed and where it runs, ready for whoever opens that wall next.
VERIFY US BEFORE YOU HIRE US
Before you hire anybody in Tigard.
- Look up the CCB number.Oregon publishes licence status, bond and insurance for every contractor. Ours is #249201.
- Ask who is actually pulling the cable.A licensed crew, not a subcontractor of a subcontractor.
Credentials on file
Oregon CCB#249201Active
Oregon electrical4911LEA
CLECLE723
WashingtonKNEPPJK854KK
Liability insurance$2,000,000
Bond$50,000Bonded & insured
ccblookup.comServing Tigard, OR
REAL KNEPPER WORK
The same standard on every job, from a Tigard Triangle office to a Washington Square retail unit.
WHO CALLS US IN TIGARD
We are not the only crew on your site.
General contractors
We work to your schedule and alongside your trades. Off-hours and weekend pulls in occupied buildings are normal for us.
IT providers
You own the switches and the network. We get the copper and the fiber to where you need them, terminated, tested and labelled.
Property & facility managers
One licensed, bonded, insured contractor for the cabling, cameras, access control and Wi-Fi across your buildings.
READ THE LABEL
The spec sheet.
Published cabling standards, so the Tigard conversation starts with the same numbers. What your building needs depends on distance, device count and what is at the far end.
MediumRatedMax run
Cat5e1 Gbps100 m
Cat610 Gbps55 m
Cat6A10 Gbps100 m
OM4 multimode10 Gbps400 m
OS2 single-mode10 Gbps10 km
PoE 802.3af15.4 Wper port
PoE+ 802.3at30 Wper port
PoE++ 802.3bt60–90 Wper port
TIA/EIA-568 · IEEE 802.3 · channel lengths, copper at 10G
OFF THE VAN, IN TIGARD
What it says on the truck.
- Powered byIntegrity
- Connected byExpertise
- Driven bySafety
- Committed toOur community
TIGARD QUESTIONS
Straight answers.
Do you work in Tigard, OR?
Yes. Tigard is 11 miles, about 28 minutes, from our Milwaukie shop, and it is one of the areas Knepper Contracting works in regularly.
Are you licensed for work in Tigard?
We hold Oregon CCB #249201, Oregon electrical licence 4911LEA and CLE723, with $2,000,000 in liability insurance and a $50,000 bond.
Do you do residential jobs in Tigard?
Our specialty is commercial and industrial installations. Tell us about the project and we will say honestly whether we are the right fit.
What are your hours?
We’re on call 24/7 — off-hours and weekend installation is normal in occupied buildings.
How do I get a quote for a Tigard project?
Book a walkthrough. We look at the building, then you get a written scope and price you can compare against anyone else’s.
5.0
THE RECORD
Eighteen reviews. Five stars. Serving Tigard and the rest of the metro.
Work comes to us by word of mouth and repeat customers. The reviews are on Google, not on this page, because you should not have to take our word for it.
ALSO NEAR TIGARD
The rest of the metro is in range too.
Same crew, same nine services, same licence numbers.
READY WHEN YOU ARE
Get a quote for your Tigard project.
Call, any hour(971) 419-8917
Emailjohn@kneppercontracting.com
Shop11209 SE Wood Ave, Milwaukie, OR 97222
Move the pointer across this band · the photos are real Knepper jobs